I finally painted my kitchen tile! I procrastinated on this DIY project for the longest — mostly because my kitchen tile is glass tile and I was unsure how the final project would look once completed. I’m sooooo happy with how it turned out! This project was super easy and took one weekend only. I wish I did it two years ago when I first moved in. Better late than never!
What You’ll Need:
Blue painter’s tape;
White Bristle Paintbrush for oil based paints;
Zinsser Bulls Eye 1-2-3 White Water Baded Prime;
Latex high-gloss paint and primer. I used Behr Premium Plus Interior Hi-Gloss Enamel in Ultra Pure White;
TSP Cleaner; and,
Microfiber Cleaning Rag.
Step One: Clean Your Tile
First, pour 1/4 of a cup of the TSP cleaner into a bucket. Next, fill the bucket with warm water (I poured approximately one gallon). Take your microfiber cleaning rag and scrub the diluted cleaning solvent on the tile. If your tile is heavily stained, add more TSP solution to your bucket. This takes some good elbow greasing to remove actual kitchen grease and stains. Please allow the tile to dry before priming (I waited about 7 hours.)
Step Two: Prime Your Tile
I used Zinsser Bulls Eye 1-2-3 White Water Baded Primer. I only did one coat of primer. Please wait at least 24 hours before painting the tile. Make sure that you are also priming the grout!
When priming your tile, try to apply the primer moving the brush in one steady direction. Since I was painting over glass ceramic tile, moving the brush back and forth was causing brush strokes or lines to appear, very visibly. I noticed that when I applied the primer by moving the brush strokes in one direction, it reduced the appearance of brush strokes to the naked eye.
Step Three: Paint Your Tile
Once your primer is dry, begin painting the tile. Again, you want to apply the paint with the bristle brush, moving in one direction, the same direction you applied the primer.
Painting my ceramic tile took approximately two coats plus touch-ups on the grout.
While painting your tile, be sure that you are painting your grout. My tiles were originally brown with grey grout. So, it was very important that I painted the grout as well, to create a seamless look of white subway tile and white grout. For touch ups, I used a small sponge brush since the tip of the brush fit in the grout lines perfectly, without messing with the brush strokes on the tile itself.
What do you guys think? Do you prefer the brown glass tile? I think the white subway look really brightened up the space and changed the energy of the room. I would love to know what you all think, so feel free to comment below!